Username Password
HOME EN |   JP |   TW

Banner




- Forgot your password?
- Forgot your username?


Your Cart is currently empty.

My status

Live Chat Support

Banner

Connect with us:
   

Exchange Rate Ref.:
US$1 = RMB$6.5
US$1 = HK$7.8

Welcome, Guest
Please Login in left hand box or Register.    Lost Password?

UD-10 as standalone DAC
(1 viewing) (1) Guest
UD-10 USB Audio Converter
Go to bottomPage: 1
TOPIC: UD-10 as standalone DAC
#196
UD-10 as standalone DAC 9 Years, 2 Months ago  
Hi all, I currently drive my power amplifier using a modified M-Audio Revolution 7.1 in my HTPC. I'd like to attempt the same with a UD-10, getting the sound out of the noisy PC environment. My volume control is via the PC. My first modification will be to remove the headphone jack and install some RCA's for a better connection to the amp. Given the UD-10 analog out was designed to suit headphones, is there any modifications I can do to improve it as a dedicated DAC out to my amplifier? I notice there are is a couple of capacitors inside, are there any that would benefit from changing to higher quality ones? If so, which ones? Any help would be greatly appreciated. Cheers, Nathan
The administrator has disabled public write access.
 
#197
Re:UD-10 as standalone DAC 9 Years, 2 Months ago  
I think I someone else asked the same question on this forum. They were told to email Support directly. Because I want to do the same thing, I wrote Support directly a few days ago. Still waiting for a reply. BTW, I just replaced the headphone jack with Vampire RCA jacks, available from Audiomagus, and the results are unbelievable. It's as if I have a different DAC. Every aspect of the sound improved substantially. You don't know how good the UD-10 DAC sounds if you are running through the headphone jack. earplay
The administrator has disabled public write access.
 
#198
Re:UD-10 as standalone DAC 9 Years, 2 Months ago  
Hi JUSTCALLMEFRANK I have removed the two 47mF Electrolytic Capasitors and soldered two 2,2mF polypropylene from plus of where the old Caps was soldered, and directly to the new Phono Inputs. The Earphone Jacks are olso removed, and the Ground from here, are soldered to Ground of the Phono Inputs. The sound is very good, though the output is still not as high as a normal CD player Best Regards. Eallann
The administrator has disabled public write access.
 
#199
Re:UD-10 as standalone DAC 9 Years, 2 Months ago  
Kindly take note that Trends UD-10 is using high-end Burr Brown PCM2704 IC for USB audio conversion.
The administrator has disabled public write access.
 
Go to topPage: 1

Protected by R Antispam