i just received my PA-10 headphone/pre-amp and TA-10.2P when connecting them i have two faults: 1: premap does not sound through the speakers - but headphone only works: BUT: LAUD clicking sound at 2 per second intervall, laud clicking sound makes it ipossible to listen to music.../? 2: TA-10.2P: as soon as i connect the preamp cables the blue control light starts to flash at 1 per second intervals and no sound at all. i wonder what is wrong? any ideas... a reply is most appreciated.

1. The sound of Trends PA-10 will open up after about 5 minutes of warm-up. At least half an hour of warm-up, if you are doing some audiophile listening. 2. If the problem is not gone, please go to [Setup] for adjusting the DC Bias Voltage. 3. Otherwise, please send the email to [email protected] for a return.